Attenuatore di Potenza per Chitarra
Il Reducer è semplice come dice il nome stesso, riduce la potenza dell'amplificatore per chitarra. Ciò significa che tutti i tipi di amplificatori, specialmente gli amplificatori valvolari, possono ora essere saturati senza la necessità di volumi eccessivi.
Caratteristiche SPL Reducer
- Input: 1/4" TS (Mono Jack)
- Impedenza: 4, 8, o 16 Ohm selezionabile
- Carico in ingresso @4 Ohm: 90W RMS/ 120W (picco)
- Carico in ingresso @8 Ohm: 200W RMS/ 260W (picco)
- Carico in ingresso @16 Ohm: 160 W RMS/ 180W (picco)
- Output: 1/4" TS (Jack Mono)
- Dimensioni: H68 (85mm con i piedini) x 190 x 179mm
- Peso: 1,8kg
Maggiori Informazioni
| SKU | 302164 |
|---|---|
| BarCode | 4260149320926 |
| Modello | REDUCER |
| Condizione | Nuovo |
Info produttore
Info aggiuntive
Spedizione Gratuita
Video
Reducer: A short introduction
The Reducer is as simple as the name implies, it reduces the power output of the guitar amp. This means that all sorts of amps, especially tube amps, can now be overdriven without the need of having to be too loud.
Just like the other SPL power soak products Transducer and Cabulator, we developed the Reducer together with the amp specialists from Tonehunter in Cologne, Germany.
It is placed between the guitar amp and the speaker. At this stage, it converts the amp's electric power into heat. Power reduction with resistors requires no additional power supply. The passive principle guarantees an accurate sound reproduction without any influence on the frequency response curve. So the Reducer is neutral, providing just a volume control.
For the amp output, impedance can be set to 4, 8 or 16 Ohm. Reduction is stepwise in the first stages, but it can then be adjusted continuously.
Wiring diagram: http://spl.info/en/products/for-guitar-bass/reducer/wiring-diagram.html
For more information on SPL hardware and software please visit: http://spl.info
Reducer: A short introduction
The Reducer is as simple as the name implies, it reduces the power output of the guitar amp. This means that all sorts of amps, especially tube amps, can now be overdriven without the need of having to be too loud.
Just like the other SPL power soak products Transducer and Cabulator, we developed the Reducer together with the amp specialists from Tonehunter in Cologne, Germany.
It is placed between the guitar amp and the speaker. At this stage, it converts the amp's electric power into heat. Power reduction with resistors requires no additional power supply. The passive principle guarantees an accurate sound reproduction without any influence on the frequency response curve. So the Reducer is neutral, providing just a volume control.
For the amp output, impedance can be set to 4, 8 or 16 Ohm. Reduction is stepwise in the first stages, but it can then be adjusted continuously.
Wiring diagram: http://spl.info/en/products/for-guitar-bass/reducer/wiring-diagram.html
For more information on SPL hardware and software please visit: http://spl.info
Dal Blog
Scrivi la tua recensione
Scopri di più