Pedale Multieffetto per Basso Elettrico Bass Fly Rig V2
Il Fly Rig originale, lanciato nel 2014, è stato una vera ventata di freschezza per i bassisti di tutte le categorie, tanto da diventare una serie. Infatti, il Tech 21 Fly Rig è molto più di una pedaliera multieffetto per basso elettrico. Dalle dimensioni compatte agli effetti, questo pedale contiene al suo interno un intero arsenale di effetti e funzionalità. Al cuore del multieffetto per basso Fly Rig V2 c'è sempre l'all-analog SansAmp, tecnologia che rende possibile entrare direttamente in un impianto PA o mixer o interfacce del pc. Per quanto riguarda la sezione effetti, la Fly Rig V2 offre l'essenziale, così come la possibilità di aggiungere altra roba. Cosa invece sicuramente non hai è una matassa di cavi patch, batterie sul punto di esaurirsi o ground loop. Senza considerare l'agonia di dover scegliere tra che pedali portarsi dietro e quali invece lasciare a casa. Con una pedaliera Tech 21 Fly Rig V2 puoi rilassarti, sicuro di avere tutto quello che ti serve a portata di piede.
Caratteristiche Tech 21 Bass Fly Rig V2
- Scelta fra due modalità “Character”: SansAmp Bass Driver DI per suoni classici da ampli valvolare, o VT Bass DI focalizzato su timbriche stile Ampeg
- Channel switching per diversi livelli di gain e level: da clean a distorto, o da distorto a devastante
- Effect loop integrato per la massima flessibilità
- Circuito di emulazione valvolare totalmente analogico SansAmp
- Due controlli indiendenti di Drive per Gain e Overdrive
- Due controlli di Level indipendenti
- Switch “Bite” attiva un boost di presenza
- Sezione post-EQ attiva integrata, con 12dB di cut o boost
- Compressione “FET-based” vecchio stampo
- Sezione effetti con Octafilter, Fuzz e Chorus
- Accordatore cromatico
- Impedenza d’ingresso da 4.7 megaOhm per restituire anche la pienezza del piezo
- Input pad per bassi attivi
- Grounded XLR output
- Uscita jack a bassa impedenza
- Chassis e jack in metallo
- Dimensioni cm: 33(L) x 6,4 (L) x 3,2(P)cm
- Peso: 560g
- Alimentatore 9V DC (incluso) “universal auto-switching power supply 100-240V” con prese intercambiabili, conformi ai diversi standard mondiali
Maggiori Informazioni
| SKU | 303071 |
|---|---|
| BarCode | 837088002516 |
| Modello | Bass Fly Rig V2 |
| Condizione | Nuovo |
Info produttore
Info aggiuntive
Spedizione Express Gratuita
Video
Tech 21 Bass Fly Rig v2
What's new for 2021?
The Bass Fly Rig v2 retains the same 100% analog SansAmp heart and cool effects, and now offers:
• A choice of SansAmp Character modes:
SansAmp Bass Driver DI for a variety of classic bass tube amp tones, or
VT Bass DI with a more specific focus on Ampeg-style tones.
• Channel switching for two different Drive and Level settings. Go from
clean to dirty, not-so-clean to not-so-dirty, very dirty to downright nasty,
or any variation in between.
• Effect loop to facilitate incorporating additional outboard effects.
The first Tech 21 Fly Rig® was introduced in 2014. It was a true game-changer for players in all categories, from touring pros to bedroom hobbyists. Each Fly Rig in the series is less than 13” long and weighs just over 20 oz.
Each sleek, compact unit embodies an entire rig. At each core, is the all-analog SansAmp, which makes it possible to go direct to a PA or studio mixers and computer interfaces. For effects, you have the essentials and the ability to add some fun stuff, too. What you don’t have are crackling patch cables, dying batteries or ground loops. No stinkin’ van, heavy flight cases, cable spaghetti, and no dead weight. No stressing over what to pack and agonizing over what to leave behind. No dreading cheesy backline loaners and overheating at the mere thought of your touring rig going down.
With a Tech 21 Fly Rig, you can relax. For fly gigs across the globe, jamming at the local hang, and last minute recording sessions, you’ll be the first one ready to go. Just pop your Fly Rig into your guitar case or backpack and head for the door.
Check out Sample Setting Snippets here:
https://youtu.be/ln9f5kipHs8
And for more details, go here:
https://www.tech21nyc.com/products/flyrig/bass-fly-rig-v2/
Tech 21 Bass Fly Rig v2
What's new for 2021?
The Bass Fly Rig v2 retains the same 100% analog SansAmp heart and cool effects, and now offers:
• A choice of SansAmp Character modes:
SansAmp Bass Driver DI for a variety of classic bass tube amp tones, or
VT Bass DI with a more specific focus on Ampeg-style tones.
• Channel switching for two different Drive and Level settings. Go from
clean to dirty, not-so-clean to not-so-dirty, very dirty to downright nasty,
or any variation in between.
• Effect loop to facilitate incorporating additional outboard effects.
The first Tech 21 Fly Rig® was introduced in 2014. It was a true game-changer for players in all categories, from touring pros to bedroom hobbyists. Each Fly Rig in the series is less than 13” long and weighs just over 20 oz.
Each sleek, compact unit embodies an entire rig. At each core, is the all-analog SansAmp, which makes it possible to go direct to a PA or studio mixers and computer interfaces. For effects, you have the essentials and the ability to add some fun stuff, too. What you don’t have are crackling patch cables, dying batteries or ground loops. No stinkin’ van, heavy flight cases, cable spaghetti, and no dead weight. No stressing over what to pack and agonizing over what to leave behind. No dreading cheesy backline loaners and overheating at the mere thought of your touring rig going down.
With a Tech 21 Fly Rig, you can relax. For fly gigs across the globe, jamming at the local hang, and last minute recording sessions, you’ll be the first one ready to go. Just pop your Fly Rig into your guitar case or backpack and head for the door.
Check out Sample Setting Snippets here:
https://youtu.be/ln9f5kipHs8
And for more details, go here:
https://www.tech21nyc.com/products/flyrig/bass-fly-rig-v2/
Dal Blog
Scrivi la tua recensione
Scopri di più